Oil Refresher

Natural and white

Proff Oil Refresher is an alternative to Proff Wood Floor Soap. The advantage is cleaning and re-oiling at the same time. Oil Refresher is available in natural and white. Natural is used for clear and colour oiled floors and white for white oiled floors. Oil Refresher leaves an invisible coat of oil on surface and in the grain protecting the oiled surface of the floor. Oil Refresher may be used on all oiled and oil/waxed floors.

Work Instruction:

1. Shake the Oil Refresher bottle well before use.

2. Pour 250 ml of Oil Refresher into 5 liter of lukewarm water. Use two buckets: 1 with oil Refresher solution and 1 with rinsing water. For UV oiled floor, use only 125 ml in 5 liter of lukewarm water. Use minimum quantity of Oil Refresher water on the floor. Leave Oil Refresher solution long enough on floor in order to dissolve dirt on floor. Remove dirty Oil Refresher water from floor with mop and rinse mop in bucket with rinsing water.

3. Always wipe floor after removal of dirty Oil Refresher water with hard Oil Refresher wrung mop. Always work lengthwise of the floor boards. Make sure that no puddles of water are left on the floor.

4. If the floor has been neglected and is extremely dirty, a floor machine with white pad may be used for dissolution of dirt. Removal of dirty water from floor and wiping with oil Refresher water is done as under point 3.

5. Leave the floor to dry for about 4 hours at 18 degrees Celsius.

6. If a slight gloss is requested, buff the floor with white polishing pad under floor machine after drying.

Disposal: Empty containers and product residue disposed of according to regional rules and regulations.

Declaration of content:

Consumption: 1 liter to 200 – 250m2

• Storage: Keep in tightly closed original packaging. Do not expose to heat (e.g. sunlight). Store frost-free and out the reach of children.
• Note!! Please always make a test coat on the surface for controlling the compatibility